Home > Power Supply > Recommended PSU For Running 5 Harddrives?

Recommended PSU For Running 5 Harddrives?


fan - 2x 80mm Other: - PCI-based 3-port SATA Controller w/single IDE controller (a cheap one, don't have many details on it) Thanks! -Jax PS. I have 2 drive also on 1 of the ide channel. The results were that posting was somewhat random as to being 100% successful. Is an automatic external backup solution better?

I can`t believe these people who say oh you want to spin 10 drives at the same time...well a 350 watt should do you just fine......roflClick to expand... A system builder might create a $2,000.00 PC that would need a 1000 watt PS but they'd need to be a really shroud shopper. Once I install the OS I will no longer need the DVD Burner, in fact I may take it out and put it in a different machine. clue69lessJun 6, 2006, 3:23 AM Quote: HD's use an average of 16 Watts after they spin up to speed...untill then they use about 48-50 Watts.

Power Supply For 8 Hard Drives

I assume this would use more than the average 5,400 or 7,200 RPM drive.About how much more power would you say is used by Western Digital's 10,000 RPM Raptor? IMO Fortron PSU's are $ for $ the best PSU's in existence, simply because the are so much cheaper(did I mention they are dirt cheap?) than PCP&C. ak47is1337Jun 5, 2006, 12:22 PM Quote: Hello,I need some help.

I have a raid array ide with 4 drives. it's on my list of items to purchase! :-) –Josh May 27 '10 at 18:39 @Josh OK :) Just my 2 cents. Subscribe to Our Newsletter Email: Advertisement Scroll down for the next article © 2017 MakeUseOf. Asus Power Supply Calculator Only if in "/" : alias ls='ls -I test'?

Based on suggestions here, I started off with an Antec Neo Power 500W. How Many Watts Per Hard Drive for 100 dolar aur 6000 rupee is my budget Hard Drive Not Showing Up After Installing New Graphics Card and Power Supply Unit solved Hard drive problem after install of power EVGA GeForce GTX 1070 FTW GAMING ACX 3.0 8GB G... https://www.cnet.com/forums/discussions/calculating-power-supply-needed-295483/ Yeah, I hear you all about the smaller drives, but half of the point of having them in there is because I have nothing else to do with them while having

http://www.digit-life.com/arti.../storage/hddpower.html Well, they didn't test every HD in existence but quite a few and the max spinup power consumption was between 16 to 30W. Power Supply For Lots Of Hard Drives I also have a dvd burner and a fx5200 graphics card. The issue is where on earth will you find a PSU to have a combined 15 power connectors for your PATA and SATA hard drives. The OCZ ModStream OCZ52012U mentioned is a nice unit at $100 shipped, it is a bit pricey - the $20 MIR definitly helps.I noticed Newegg has their $50 rebate on this

How Many Watts Per Hard Drive

Its 235.00! http://superuser.com/questions/671424/what-psu-to-use-for-a-home-server-with-many-hard-drives If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Power Supply For 8 Hard Drives That's not really practical. Power Supply For 3 Hard Drives Print the Oscars Best Picture Winner How to unalias a minus?

I'd personally put all those PATA drives into USB enclosures instead. #8 jonmcc33, Dec 29, 2007 Penth Senior member Joined: Mar 9, 2004 Messages: 933 Likes Received: 0 I'm running I'd like to add more hard drives in the future - perhaps another 5 or so. I took this as just barely too much of a drain while spinning up. Or, can I simply unplug the DVD burner? Power Supply Calculator Pc

However it was always perfect if I then hit the reset button. Sense i have pulled it out but it makes no difference. As stated, the biggest hit is at startup. It had enough amps on the 12v to easily handle my video card and plenty of connectors.

Maybe I'll change my mind if I start hitting a power issue again in the future, but for now they'll stay in there. Corsair Power Supply Is a professor required to provide homework solutions? However it was always perfect if I then hit the reset button.

I believe you are correct.

All rights reserved. Call it 7.5 Watts per drive to be on the safe side and to include the power for the RAID controller. They don't seem to like a lot of drives. Hard Drive Power Consumption An Athlon XP and a 5200 aren't bad, and the hard drives don't take up as much as you might think.

I have to lower the fsb to 175 to get it to boot. clue69lessJun 6, 2006, 6:52 AM Quote: Lots of scsi rigs spin up sequantially (it's acutally a jumperable setting), all of mine do, as do the servers I maintain. Wattage and Efficiency To start, power supplies have two basic ratings to be concerned with – wattage and efficiency. Watts ?

Stay logged in Sign up now! I have 2 drive also on 1 of the ide channel. My PC Power and Cooling PSU never has any problems though, but it has a much better 12V rail.Click to expand... However it was always perfect if I then hit the reset button.

It is a decent 500w unit with [email protected] so that may work for you - if you can wait it out for the MIR.Some other ones I noticed on newegg that Here are some mods I have used to give you some ideas...http://img.photobucket.com/albums/v332/pinback173/th_000_0605.jpg http://img.photobucket.com/albums/v332/pinback173/th_000_0603.jpg http://img.photobucket.com/albums/v332/pinback173/th_000_0601.jpg http://img.photobucket.com/albums/v332/pinback173/th_000_0602.jpg Quote: I was looking at the 700watt power supplyhttp://www.chiefvalue.com/product/productdetails.aspx?item=17-153-035Would this be Good?