Home > Hard Drive > Reformatted Primary Harddrive Now Cant Access Slave Harddrive

Reformatted Primary Harddrive Now Cant Access Slave Harddrive

Contents

NOTE: In most cases this will void the manufacturer warranty. But then it just freezes up. Don't force it. Although one would expect that people attempting this would be somewhat computer savy, these instructions are meant more for the individual who can explain why Captain Picard is better than Captain http://diskpocalypse.com/hard-drive/reformatted-harddrive.php

You can try right-clicking My Computer, select Manage and look for the Disk Management section. I have a Windows XP system. I think anyone who is attempting to install a new hard drive themselves should embrace the inner geek and get the job done properly… Not that something like this even requires However, it does still boot up and run windows.

Windows 10 Not Detecting Second Hard Drive

the one you just bought at best buy.. It is not dead? Step 3: Mount and connect the drive The SATA data connector is keyed so you can't install it upside-down. Then, after paying $70 bucks he restored it (with all files gone) he told me I had a virus and not to download free music anymore and always update my security

The PC will determine master/slave status according to the drives' placement on the cable ("master" at the end, "slave" in the middle). Be sure not to bump anything too hard on the way out.If you are replacing the old drive, slide the new drive in right where the other one came out. Before you start: Download MiniTool Partition Wizard Bootable CD, which is an ISO file, and then burn it to CD, DVD, or USB flash drive. Not Recognizing External Hard Drive I tried that before and after your reply.

Second Sata Hard Drive Not Recognized by Windows XP External USB hard drive not recognized in Windows 2nd Sata Hard Drive Not Recognized by Windows [Solved] (Solved) Helpful +178 Report diggleydog This drive will be the main drive, but not until I load the image from the old drive. Ask Leo! http://www.tomshardware.com/answers/id-1793944/installing-hdd-making-hdd-slave.html If your PC has only one IDE hard drive, it's probably set to "master." Assuming you chain another IDE drive off its cable, the new drive should be set to "slave."

Note: This will cause you to lose all data on the hard drive. Internal Hard Disk Not Detected In Bios The bios detected the drive and reboot. July 12, 2012 Dave Are you replacing the current drive or using this as an extra drive? Bob November 1, 2004 5:39 PM I am trying to format two 200G hard drives that are shown as "F" drive ( one large drive 382 G).

Second Hard Drive Not Showing Up In Disk Management

right click on your installed drive and put it online first. http://dtidatarecovery.com/troubleshooting-basic-hard-drive-problems-does-not-show-up-in-my-computer/ The BIOS picked it up, and I was able to see everything on Windows 7. Windows 10 Not Detecting Second Hard Drive But it is not showing in my computer.the hard-disk light is glowing, which shows that hard-disk is working.hard-disk is external power supply, maxtor-home basic, 1 TBlooking forward for your replyThanks and Second Hard Drive Not Detected In Bios I have not yet found a way to enlarge it to the full size.

Thanks for the instructions! navigate to this website I go into BIOS and sure enough it couldn't find the new SSD, but it found the new HDD. I am trying to do this with the original Hard Drive removed and the CD-Rom drive selected as the on from which to boot up. When I start “Disk Management” it ask me to initialize the disk but fails with the error message “The system cannot find the file specified”. Second Hard Disk Not Detected Windows 7

The HDD spins (that means power is clearly working), but the BIOS just doesn't pick it up. A lot of times you can get this information from the manufacturer's website. I always try to ascertain if that is actually what is occurring or if it is more that the drive no longer has a drive letter attached to it. More about the author Join our forums …maybe some of the other techs will have ideas.

I had done everything i could think of. How To Detect New Hard Drive Windows 10 Well f8 gives me options to start in safe mode etc but no BIOS.I'm sure I'm using the wrong key, does anyone know what key I should be using please ? Or, you can download a Mac Data recovery program that runs in windows.

I'm not sure what the problem is but I do recommend asking your question on our forums so other techs can address the problem.

March 16, 2012 DuROi Thanks for your fast reply, i already update my bios to the lastest one (BIOS Update - R0104J0) successfully. This is VERY time-consuming usually. At this point, you may want to make some quick sketches of just how everything is in there: Which direction is everything facing? How To Get Windows To Recognize Ssd Any more questions, please use our forums where more techs can respond.

I re-installed it twice still nothing. Chances are that you don't need to worry about this. I just wanted to transfer all my files over. http://diskpocalypse.com/hard-drive/need-help-formatting-harddrive.php what can i do?

All I want to do is get the info off the drive and toss it. I hope I was able to answer some of your questions. Thank you! how to find it is correct David Mohyla November 1, 2012 11:28 am Reply # We will be happy to help you with your hard drive recovery.

Partition and format the disk to your liking, but make sure not to convert it to a dynamic disk, as doing so will provide plenty of annoyances down the road.Finished!Congratulations, your Tip: Depending on the BIOS used by system, the error message could also be "Operating System not Found". 5 Causes That Lead to Operating System Missing In general, both hardware issues September 14, 2011 Dave If this is an old hard drive it might have failed electrically-there's nothing you can do about that. Tip: An older PC might "see" just 137GB or less of your new drive, if it's 150GB or larger, due to limitations of its BIOS or OS version.

Thanks. It's a Seagate Barracuda 7200.7, and the problem is, the BIOS doesn't see it, but when I boot from a system disk, be it Linux or Windows, then they both see I can't force a format, and I came to the conclusion that, Sure, it's in use by the operating system. Ozzu is a registered trademark of Unmelted, LLC.

If it does this means the drive has physical damage and you should try cloning it off with a forensic cloner like Speed Clone. what to do???? If so, remove it. it stay on 20% and dont get moved...

could youplease let me know how I can solve the problem pavan May 26, 2010 6:25 AM there is an error in formating my c drive i dnt get the error I had been playing with the all day but your tip fixed the problem. Try Methods Here! In addition I had to purchase a PCI serial ATA host controller card with a cable to connect the new HD.

I went to Disk Management and it is showing healthy (Primary Partition). I had to go into Windows and assigne a letter (C:,G:). Now, I need to delete/ formate the old system drive C but I am not able to do so, it always comes saying that windows was unable to complete the formate.