Need Help Installing Hard Drive
i changed the primary drive in the bios to the ide hard drive , still couldnt get passed start up mode. Reply David on April 19, 2008 at 7:41 am Great! The older connection is called IDE, and the drives are sometimes called PATA. the drive is working properly. this content
In Windows 9x/ME, it will appear, but you will need to right-click on the new drive and choose "Format" from the menu. Note that some older PCs use 40-conductor IDE cables, not the 80-conductor ones current drives require. (Compare your kit cable to the one installed—the 80-conductor variety has much thinner wires.) 80-conductor The most compatible drives are IDE, followed by Ultra-IDE (EIDE), and then Serial ATA (SATA). Unscrew all the screws on both sides of the hard drive, and then slide it out of the housing.
How To Install A Second Hard Drive
Registration is free and the forums are specifically for tech issues such as yours.Thank you and I hope you get your issues resolved!Tyler ThompsonPCMechanic Editor-in-Chief[emailprotected] Reply steve scott on November 6, Next, consider the power connection. Even if you can access the inside where it stands, you need to unplug the computer. How To Connect Hard Drive To Motherboard This hard drive is flipped upside-down to show its parts.
Reply Johnny on December 6, 2008 at 5:19 pm Not sure what all the fuss was about in some of your earlier posts, but you made this post easy to understand. Sometimes, you may need to tip the case or get into some strange positions to reach all the screws; other times, the hard drive is mounted in a cage that you'll You might need to press the key repeatedly, about once every second, until a BIOS Setup utility screen opens. IDE drives are older model hard drives that can be identified by the long rows of pins on the back.
Answer this question Flag as... How To Install A New Hard Drive On A Laptop Make sure the hard drive displays in the Device Configuration window. Reply Douglas on September 26, 2009 at 3:28 pm Oh My God! He also writes for @matt_on_tech.
Install New Hard Drive Windows 10
Pay close attention to static electricity when working with the inner components of your computer. Virtually all new desktop hard drives sold today use the SATA interface (unless you’re dealing with servers). SATA uses simple cables that are keyed to fit on the drive and motherboard connector How To Install A Second Hard Drive http://pad2.whstatic.com/images/thumb/8/86/Install-a-Hard-Drive-Step-5-Version-2.jpg/550px-Install-a-Hard-Drive-Step-5-Version-2.jpg http://pad1.whstatic.com/images/thumb/8/86/Install-a-Hard-Drive-Step-5-Version-2.jpg/300px-Install-a-Hard-Drive-Step-5-Version-2.jpg /9/9f/Install a Hard Drive Step 5.360p.mp4 You may need to remove more cables or cards in order to access the hard drives in a tight case. 6 Insert your How To Format A New Hard Drive Go through the appropriate prompts, making sure to select your older drive as the source and your newer one as the destination (pay careful attention to the hard drive sizes indicated
If this article is too hard for you to understand, then perhaps you should look for another article somewhere else or wizen yourself up a little and come back for more.It's http://diskpocalypse.com/hard-drive/need-help-installing-hard-drive-questions.php We'll be installing a SATA drive, but the process is similar for the other common drive type, IDE. Any advise? Next: Connecting and Troubleshooting Your New Drive Installing a new hard drive can get complicated if something goes wrong, and we’re already getting into tl;dr territory. How To Install A New Hard Drive Windows 7
You can follow him on Twitter or Google+. Set the jumper for your primary drive to Master. Reply Joshcore on July 30, 2007 at 7:54 pm ^Ryan, this article is aimed at people who already know what jumpers are and the difference between SATA and IDE based hard have a peek at these guys Formatting could take an hour or more, depending on drive capacity.
If you run out of that storage, installing a new drive may be the most practical solution. New Hard Drive Not Showing Up I am in the happy Medium of the geek world. Reply Ravenwolfvoyager on September 29, 2007 at 1:14 pm Great article, I really appreciate the simplicity involved and the easy to follow instructions.
If you plan on replacing your existing hard drive (see warning on replacing drives), be sure to get one with enough space to compensate for what you're losing. 5 Shut down
Support Forum Join the conversation! Someone that explains so even I can do it. Yes, there are tools and programs that can "migrate" or "move" your OS and data from one drive to another but the clean install and manual data restore method is usually http://diskpocalypse.com/hard-drive/need-helping-installing-new-hard-drive.php MESSAGES LOG IN Log in Facebook Google Email No account yet?
Before you begin Before you begin, check the following items: If installing an additional drive, make sure that your computer has at least one additional drive bay. You will need a small Phillip’s head screwdriver in order to remove the screws and the panel. Essentially all cables, drives and motherboards with SATA are compatible, and you generally get the smaller of the drive speed and motherboard speed. One is used by my system hard drive (the drive that came with my computer), and the other is used by my SATA CD/DVD drive.
It is best to leave the case cover off for now in case you need to fiddle with something or troubleshoot the installation.If you did not use a controller card, enter Use an anti-static strip or touch the screw on an active light switch cover to ground yourself before touching the components and cables inside your computer. I have two choices 1 - to replace the hard drive and reboot my machine using my back up programme with a view to buying a new machine when Microsoft issue Consider buying (or making, see Build an External Hard Drive) an external hard drive if you have USB support on your computer.
Many thanks. SATA drives have a thinner cable and no jumpers to worry about. 2 Make sure you have room for an extra hard drive, here's one way to do this: Restart your Im very sure I have it connected correctly, but when I boot up and try to enter the setup it takes a very long time and eventually goes black bar a Magnet-tipped screw drivers can help keep you from dropping screws in difficult-to-reach places.
To use the new drive as a second drive, the primary partition option should still be selected, otherwise, Windows will not format the drive.Thank you again. EXCELLENT!!!!thanks guys for creating this it sure is a help for newbies out there 🙂 as Kyle said waaaaaay back, "I did'nt know that disk management exist" hehehe Reply Bill R For SATA drives, your life, again, got easier. Show More Installing an internal hard drive is one of the more
Restart the computer to begin using it.